Manufacturing centers to focus on digital design, metal alloys

Obama to announce Feb. 25 that Chicago and Detroit won the bidding to host the public-private partnerships for manufacturing innovation


The expected announcement Tuesday of two manufacturing innovation institutes in Chicago and Detroit will continue the Obama Administration’s emphasis on high-tech manufacturing while creating a public-private partnership to deliver funding and existing technology.

White House officials were quoted as saying the partnership allows funding for “key technology areas that encourage investment and production in the U.S."

After a 10-month competition among cities to provide a home for these high-tech centers, Detroit’s manufacturing innovation center will focus on developing lightweight allows and metals, while the Chicago innovation center will focus on digital manufacturing. Each center is being funded with $70 million in Department of Defense funding and $70 from private corporations.

Among the companies mentioned in news reports as being part of these private funding sources are EWI, an Ohio-based research company in the metals industry for the Detroit project, and companies such as Siemens, Dow Chemical, Lockheed Martin and General Electric for the digital manufacturing center in Chicago.

When the competition for these high tech centers began, White House officials said the centers would “serve as a regional hub designed to bridge the gap between basic research and product development, bringing together companies, universities and community colleges, and Federal agencies to co-invest in technology areas that encourage investment and production in the U.S.”

The first two such facilities already are in motion. In August 2012, Obama announced creation of the National Additive Manufacturing Innovation Institute in Youngstown, Ohio. In January 2014, he announced the creation of a power electronics hub in Raleigh, N.C. funded through the U.S. Department of Energy.

The implications for the innovation centers extend beyond just the manufacturing sector. While the digital manufacturing center “will raise the global competitiveness of U.S. small- and medium-sized manufacturers by smart and comprehensive use of the ‘digital thread’ throughout design, production and support” the Defense Department officials said it will benefit from such a consortium.

“The department requires complex, highly integrated systems to gain technological advantage, but it lacks the open market or volume to push costs or cycle times lower,” officials said in a white paper overview of the plan. It said the digital manufacturing design center would “help drive a paradigm shift in the development, production and sustainability of complex weapons systems by reducing acquisition lead time and costs through the application of digitally networked and synchronized processes and tools.”

For more on each of the innovations centers:

•  Digital Manufacturing and Design Innovation
•  Lightweight and Modern Metals Manufacturing
• Next Generation Power Electronics Manufacturing

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.