Major upgrade of PC-based control platform

Beckhoff Automation releases TwinCAT 3, largest-scale upgrade since 1996.

12/23/2011


Beckhoff Automation releases TwinCAT 3, largest-scale upgrade since 1996.Beckhoff Automation has released TwinCAT 3, with delivery of this new generation of software to customers expected to start in early 2012.

With TwinCAT 3 and eXtended Automation Technology (XAT) from Beckhoff, dynamic PC-based control software is available that expands the potential of the standard automation world considerably. The company says that in addition to the object-oriented IEC 61131-3 extensions, the programming languages of the IT world are available in TwinCAT 3 via C and C++. Additionally, the integration of Matlab/Simulink facilitates a connection to scientific fields. All of this is possible in one flexible engineering environment. The software modules can run in different languages within a common runtime. The advantage of this modularity is improved reuse of modules once they have been written and tested. The runtime operates under demanding real-time conditions with the use of multi-core technology and the support of 32-bit or, in the near future, 64-bit operating systems.

The features of TwinCAT 2 are continued in TwinCAT 3 with the eXtended Automation Architecture (XAA). In addition, all widely-used fieldbuses will continue to be supported in the future. Motion control, from point-to-point movements to CNC, is still possible using XAA. Automation technology is also expanded with the scientific automation themes already present in TwinCAT, such as robotics, measurement technology, and condition monitoring. New features include the possibility to use additional programming languages such as C/C++ and Matlab/Simulink.

The eXtended Automation Engineering environment (XAE) in TwinCAT 3 is essentially the Microsoft Visual Studio platform. Alongside the already existing C/C++ languages, Beckhoff has also integrated the IEC 61131-3 programming standard to provide the benefits and convenience of the IT framework for automation.

Integration in Visual Studio takes place in two different ways. In the TwinCAT standard version, only the framework of Visual Studio is used for handling, linking to source administration software, help functions, etc. In the second variant, TwinCAT 3 components integrate themselves directly in Visual Studio 2010 if it is present. If it is not present, Visual Studio is installed with the TwinCAT 3 components. In this version, the programming languages C/C++ and connection to the Matlab/Simulink real-time workshop is available to the user. For C/C++ users, a debugger with online monitoring functionality has been developed that extends beyond the normal debugging functions of C/C++.

TwinCAT System Manager, the configuration tool for I/O and motion, is similarly integrated into the same development environment in TwinCAT 3. The advantage of this is the possibility to integrate further programming languages or to use additional tools, such as source code administration tools, with little effort.

In the TwinCAT 3 eXtended Automation Runtime (XAR), all modules written in IEC 61131, C/C++ or Matlab/Simulink are processed in real-time. The TwinCAT real-time extension for Microsoft operating systems is used here. The tasks can be processed with a minimum cycle time of 50 μs and a very small amount of jitter. TwinCAT real-time has also been extended with the possibility to distribute certain tasks to different cores of a multi-core CPU. This enhances PC controller performance even further. The growing number of deployments of 64-bit operating systems will also be supported by TwinCAT 3.

www.beckhoff.com

Beckhoff Automation GmbH

Edited by Peter Welander, pwelander(at)cfemedia.com

Visit the Control Engineering information control channel.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.