Machine Safety: More on shared responsibilities

Broad responsibilities of designing and building a safe machine from the supplier perspective were detailed in a November Control Engineering article by Steve Wright. Issues beyond that include additional shared responsibilities.

12/18/2012


In the November issue of Control Engineering, Steve Wright wrote a great article explaining the broad responsibilities of designing and building a safe machine. Steve is directly on point from the supplier perspective. Now, let’s take this discussion one step further.

 

I’ve often wondered, given the U.S. model for enforcement, why we write safety standards for machine design but enforce safety via OSHA who only looks at the users of machines? By default, I’ve heard several people state that machinery OEMs in the U.S. are not regulated (by OSHA) to build safe machines. It seems that OSHA will go into an original equipment manufacturer (OEM) facility and cite worker safety issues but they don’t evaluate the machine they’re manufacturing.  

 

Having said that, the reasons (in my opinion) that Steve’s article is so relevant is that OEMs need to build safe machines because:

  • Company policy
  • Industry best practices
  • It’s right to reduce points of hazard
  • Global compliance for export
  • Compliance to customer specifications
  • Potential fault in litigation

Flowchart on left shows the relatively straightforward European legal model for enforcement. On the right, the U.S. model is less straightforward. Courtesy: JB Titus & AssociatesThese are some of the points which can easily be realized by reviewing the model comparisons between Europe and the USA in the graph on the left. You can readily see that it’s considered illegal for an OEM to build an unsafe machine in Europe.

 

So, I believe the reason Steve’s article is so important here in the U.S. is for OEMs comply with the safety standards, which helps users purchasing safe machines to provide a safer place for employees to work. Additionally, OSHA’s enforcement of the user community for installed machines further helps to provide a safer environment for employees.

  

J.B. Titus, CFSE

Your comments or suggestion are always welcome so please let us know your thoughts. Submit your ideas, experiences, and challenges on this subject in the comments section below.

Related articles:

Machine safety: Shared responsibility

Inside Machines: Does adopting ISO 13849-1:2006 change the U.S. model for compliance and enforcement?

Machine Safety – does OSHA reference consensus standards for compliance?

Machine Safety: Is OSHA okay with my 'acceptable' risk mitigation?

  

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.