Lighting in industrial facilities

The Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study indicated that 61% of engineers specify, design, or make product selections for industrial/manufacturing facilities and warehouses—and eight in 10 of these engineers are responsible for determining requirements/writing specifications, researching and evaluating options, and/or recommending the product brands.

04/26/2016


Figure 2: When selecting lighting products for industrial facilities, engineers generally compare product quality, energy efficiency, previous experience with manufacturers, and manufacturers’ reputations. Courtesy: Consulting-Specifying EngineerThe Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study indicated that 61% of engineers specify, design, or make product selections for industrial/manufacturing facilities and warehouses—and eight in 10 of these engineers are responsible for determining requirements/writing specifications, researching and evaluating options, and/or recommending the product brands. Below are five findings as they relate to industrial facility projects:

  1. Annual value of products specified: The average engineering firm specifies $785,583 in total lighting and lighting control products for new and existing industrial facilities on a yearly basis. Thirty-nine percent of these firms specify more than $1 million in lighting products for industrial facilities annually.
  2. Changes affecting design, products: Within the past 2 years, 58% of industrial facility designs have been very affected by changes to LED technologies and specifications. Forty percent of engineers also reported that changes with energy-efficient designs and energy consumption have affected their projects.
  3. Top challenges: Inadequate budget (74%), lighting controls sequence of operations and integration (62%), and interoperability and complementing systems (55%) are the most difficult challenges for lighting engineers and designers in industrial facilities.
  4. Issues to lighting design: When looking toward the future of lighting design in industrial facilities, engineers are most concerned about keeping up with new/changing technologies, designing for energy conservation/efficiency, and changes to codes/regulations/standards.
  5. Products specified: Eight in 10 engineers specify LEDs; lighting controls; and/or T5, T8, or T12 fixtures for industrial facilities.

View more information at www.csemag.com/2015LightingStudy


Figure 1: The average building automation system payback period is 25 months. Source: Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems Study44% of fire protection design engineers expect to specify chemical or clean agent fire suppression systems within the next 12 months. Source: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

20: Average number of years that electrical engineers have worked in their current industry. Source: Consulting-Specifying Engineer 2015 Electrical and Power Study

62% of lighting engineers most frequently write performance or proprietary (open) lighting specifications. Source: Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study

More research

Consulting-Specifying Engineer covers several research topics each year. All reports are available at www.csemag.com/research.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me