Lighting in hospitals, health care facilities

Lighting and lighting control findings as they relate to hospital and health care facility projects.

By CFE Media August 22, 2016

The Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study indicated that 47% of engineers specify, design, or make product selections for hospitals and/or health care facilities—and eight in 10 of these engineers are responsible for determining requirements/writing specifications and/or researching and evaluating options. Below are five lighting and lighting control findings as they relate to hospital and health care facility projects:

  1. Annual specified products value: The average engineering firm specifies $868,411 in total lighting and lighting control products for new and existing hospitals and health care facilities annually. Forty-three percent of these firms specify more than $1 million in lighting products for hospitals and health care facilities annually.
  2. Changes affecting design, products: Within the past 2 years, 59% of hospital and health care facility designs have been very affected by changes to LED technologies and specifications. Forty-one percent of engineers also reported that changes with lighting codes and standards have affected their projects.

  3. Top challenges:
    Inadequate budget (78%), interoperability and complementing systems (65%), and lighting controls sequence of operations, integration, etc. (64%) are the most difficult challenges for lighting engineering and design in hospitals and health care facilities.
  4. Products specified: Eight in 10 engineers specify LEDs; lighting controls; and/or T5, T8, or T12 fixtures for hospitals and health care facilities.
  5. Design factors: When selecting lighting products for hospitals and health care facilities, engineers compare product quality (100%), energy efficiency (99%), manufacturer’s reputation (95%), initial cost (94%), and technical advantage (94%).

View more information at www.csemag.com/2015LightingStudy. Amanda Pelliccione is the research director at CFE Media.


8 in 10 fire protection engineers are responsible for determining requirements/writing specifications for fire and life safety systems. Source: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

>73% of electrical engineers specify circuit breakers, fuses, etc.; emergency and standby power equipment; and transformers for new and existing buildings. Source: Consulting-Specifying Engineer 2016 Electrical and Power Study

37% of firms specify more than $1 million annually in lighting and lighting control products for new and existing buildings. Source: Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study

More research

Consulting-Specifying Engineer covers several research topics each year. All reports are available at www.csemag.com/research.



Author Bio: Since its founding in 2010, CFE Media and Technology has provided engineers in manufacturing, commercial and industrial buildings, and manufacturing control systems with the knowledge they need to improve their operational efficiency. CFE delivers the right information at the right time around the world through a variety of platforms.