Light loss factor: IES versus manufacturer recommendations

Engineers should understand appropriate light loss factors, as recommended by the Illuminating Engineering Society.

08/27/2014


The lighting industry has agreed that the minimum life of an LED luminaire shall be at least 70% lumen maintenance (IE: L70) at 50,000 hours of operation. Based on these standards, the Illuminating Engineering Society (IES) recommends using a light loss factor of not more than 0.7. However, some manufacturers identify products as having hours of operation longer than 50,000 hours. Others indicate that their luminaire will have 90% lumen maintenance (L90) for more than 50,000 hours. A few manufacturers recommend a light loss factor to use in calculations for their product.

In these cases, what is considered an appropriate light loss factor? It boils down to individual judgment based on the application of the LED luminaires, the lighting requirements of the space, and the level of confidence in the manufacturer’s data. As it is unlikely that most LED products on the market have been fully tested to their rated life to prove their output, it seems reasonable to err on the side of caution. The ultimate light loss factor selected for a given LED luminaire will have a direct impact on its evaluation when compared to other sources.


Brian Fiander is an electrical engineer at Harley Ellis Devereaux specializing in lighting design and specification. He serves as one of the firm’s sustainable design champions, acting as a resource for other staff members regarding green design, LEED certification, lighting, and electrical systems. He has participated as a panel speaker for the IES Detroit chapter on LED installation and application due to his understanding and specification of LED luminaires.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me