LEEDing construction safety a Natural Step

After the sixth construction worker in six months died at the $9.2 billion MGM Mirage CityCenter construction site, workers went on strike citing conditions were unsafe and Perini Building Co. was being unresponsive. It lasted only one day, but the largest-ever safety related strike in Las Vegas at the largest-ever private construction project in the United States attracted national attention.

06/01/2008


After the sixth construction worker in six months died at the $9.2 billion MGM Mirage CityCenter construction site, workers went on strike citing conditions were unsafe and Perini Building Co. was being unresponsive. It lasted only one day, but the largest-ever safety related strike in Las Vegas at the largest-ever private construction project in the United States attracted national attention.

I was in Las Vegas at the time, and witnessed a tableau of 20 or so unmoving cranes looming over a complex conglomeration of structural steel and partially clad towers, animated only by an ant-like march of picketers. In a blog I posted that morning at www.csemag.com/blogs.html , I noted that CityCenter has aspirations for LEED NC Silver, and that LEED NC Version 2.2 does not have a prerequisite for safe work sites. The words “safe” and “safety” appear only one time each, and both in reference to lighting design. The draft of LEED 2009 under public review does not enhance LEED’s concern for work-site safety.

There exist measures that LEED easily can adopt, such as OSHA 29 CFR 1926, “Safety and Health Regulations for Construction.” And there is precedence. Sweden’s Natural Step framework for sustainability, which is gaining legs in the United States and has been talked about being adopted by LEED, addresses safety indirectly. The fourth of its four Framework elements states, “In a sustainable society, people are not subject to conditions that systematically undermine their capacity to meet their needs.” Workers being subjected to unsafe or unhealthy conditions on a green-building construction site, being paid unfairly low wages, or being subjected to discriminatory practices, conflicts with this criterion.

LEED can close the health and safety loophole by adopting OSHA 29 CFR 1926 as a prerequisite, with provisions that allow local amendments, and awarding one credit if a project is completed without a serious injury or death. Certifications should be revocable where “accidental” injuries or deaths complicit with negligence or corruption occurred during construction, but were proved to be complicit with negligence after the certification was awarded. While such provisions might not be perfect preventative measures, they provide the U.S. Green Building Council with rear-guard action to protect its name and that of LEED.

Such a provision could have international implications. In the United Arab Emirates, for example, construction workers are reported by Human Rights Watch of New York City as being treated like “indentured servants.” Recently, there’s been a lot of buzz for Dubai “going green” and erecting LEED-certified buildings. How will Dubai’s LEED projects treat construction workers?

With LEED 2009 under development, the USGBC and its members have an opportunity to show they care as much for the people who build buildings as those who own and occupy them.

Send your questions and comments to: Michael.Ivanovich@reedbusiness.com





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me