LED downlights

The Halo RL4 LED series features retrofit baffle-trim module for 4 in. aperture recessed downlights.

11/06/2014


Eaton's Halo RL4 LED series features retrofit baffle-trim module for 4 in. aperture recessed downlights. Courtesy: EatonEaton's Halo RL4 LED series features retrofit and baffle-trim recessed downlights. The RL4 integral LED driver is dimmable at 120 V. The RL4 lens provide uniform illumination and wet location listing. Halo RL4 model consumes 11 W and lasts up to 22 years (based on six hours of daily use). The LED trims are designed to install in 4 in. aperture housings and are suitable for new construction, remodel, or retrofit installations. The model provides light output equivalent to a traditional 50 W incandescent light bulb. RL4 module construction includes LED, heat sink, reflector, lens, baffle, and trim ring. Its heat sink conducts heat away from the LED to keep the junction temperature below specified maximums, even when installed in insulated ceiling environments.

Eaton

www.eaton.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me