LED array holder

Molex's LED array holder provide compression contacts, eliminating the need for hand soldering or surface-mount technology.

08/03/2012


Molex's LED array holder provide compression contacts, eliminating the need for hand soldering or surface-mount technology. Courtesy: MolexMolex’s LED array holder supports Citizen Electronics’ chip-on-board (COB) series of arrays. Molex offers LED array holders for the Citizen CLL-330 and CLL340 LED array products. These provide compression contacts to power the arrays while eliminating the need for hand soldering or expensive surface-mount technology equipment. Ideal for light fixture original equipment manufacturers, the holders reduce installation time and increase connectivity options while lowering costs. The solderless screw-down connection allows for a standardized manufacturing process, adding to the design flexibility of the Citizen COB series of LEDs. Molex LED array holders are ideal for all general illumination applications including downlighting, architectural lighting, and area lighting.  The thermoplastic housing supports high heat-generating environments and the holders comply with UL 496 specifications. 

Molex Inc. 

www.molex.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Integrating electrical and HVAC systems; Tracking and conserving facility water use; Energy code advancements; The future of professional engineers
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me