LED adjustable wall packs and bullet flood lights

The DesignLights Consortium-qualified LED Small and Large Adjustable Wall Packs offer energy savings over metal halide fixtures. The LED Bullet Flood Lights provide energy-efficient, directional lighting for landscape, facade, and outdoor signage.

10/17/2014


The DesignLights Consortium-qualified LED Small and Large Adjustable Wall Packs offer energy savings over metal halide fixtures. The new LED Bullet Flood Lights provide energy-efficient, directional lighting for landscape, facade and outdoor signage.The DesignLights Consortium-qualified LED Small and Large Adjustable Wall Packs offer energy savings over metal halide fixtures. The fixtures are constructed with chip-on-board LEDs on pivoting heads that aim light precisely. The wall packs feature an unfastened back plate that is attached to the main body with removable security tape. The LED Wall Packs are designed with heat-sinking fins that extend the L70 lifetime of the fixtures to 120,000 hours at 25 C. The new LED Bullet Flood Lights provide energy-efficient, directional lighting for landscape, facade, and outdoor signage. The Bullet is constructed with a precision die-cast aluminum housing and tempered, shatter-resistant glass for durability. It is offered in crisp daylight of 5000 K, as well as a warmer 3000 K temperature. 

MaxLite

www.maxlite.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me