LaPointe named AMCA president

10/01/2009


 

Art LaPointe, vice president and general manager of Construction Specialties Inc. , Cranford, N.J., was elected president of AMCA International at the association's annual meeting held this past September.

 

LaPointe has been an enthusiastic supporter of AMCA and has helped develop and improve many product performance guidelines and standards; he also has helped further efforts to have AMCA standards written into architectural specifications.

 

Construction Specialties Inc. has been an AMCA member company for more than 30 years. LaPointe has been involved with AMCA since 1996. He has served as chairman and co-chair of the Air Control division, and as an AMCA Bylaws Task Force member. Additionally, he has been a longtime member of the Statistical Program committee. In the last six years he has served as a member of the AMCA Board of Directors, and more recently as a member of the Executive Board holding the positions of director-at-large, treasurer, and vice president.

 



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me