Ladder tray for spanning long distances

The 7D38 profile ladder tray is ideal for applications where spanning long distances and holding heavy industrial cabling is critical.

04/10/2017


The 7D38 profile ladder tray is ideal for applications where spanning long distances and holding heavy industrial cabling is critical.Cope's 7D38 profile ladder tray is an aluminum, 3-in. load depth, 20C ladder tray that is rated to hold 100 pounds per ft over a 20-ft span. The 7D38 ladder tray’s low profile is an advantage in areas with limited installation space, which is becoming tighter as many building trades attempt to occupy the same ceiling in tight configurations. With the 20-ft 7D38 ladder, fewer supports and connections are required on the additional 8 ft of tray while supporting the 100 lbs/ft required.  This results in less installation labor, smaller inventory costs for all thread and strut, and a better overall system design when making long cable tray runs. The 7D38 profile ladder uses an exclusive swage rung process, which ensures a superior mechanical and electrical connection. In addition to the new 7D38 profile, Cope can also make a 7D44 aluminum trough product with prefabricated metal, consisting of ventilated or solid bottoms, and welded to the side rails. 

Cope

www.copecabletray.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me