ITER standardizes on ETAP for fusion power project

International organization will use ETAP for power system design and analysis.


Operation Technology Inc. (OTI), developers of the ETAP enterprise solution for electrical power systems, has announced that the ITER Organization , a joint international research and development project, is using ETAP for the design and analysis of its power system.

As a part of the research and development project, ITER’s facility in Cadarache, France, will be the world’s largest experimental site to demonstrate the scientific and technical feasibility of fusion power.

When operational, ITER will study plasmas in conditions similar to those expected in an electricity-generating fusion power plant. It will generate 500 MW of fusion power for extended periods of time, 10 times more than the energy input needed to keep the plasma stable. It will therefore be the first fusion experiment to produce net power. It will also test a number of key technologies, including the heating, control, diagnostic, and remote maintenance that will be needed for a real fusion power station.

“We are proud to have the ITER Organization standardize on the ETAP Power System Solution and implement ETAP’s state-of-the-art capabilities for one of the most advanced power-generating technologies,” said Shervin Shokooh, vice president of engineering. “With worldwide demand for reliable energy on the rise, fusion energy has the potential to provide a clean, long-term solution, and we are supportive of such an imperative undertaking.”

“The ITER Project selected ETAP as the electrical analysis tool for several reasons. The U.S. nuclear qualification ensures high level of quality. Moreover, in an international environment like ITER, ETAP demonstrated a high level of support in all the countries involved in the project,” said Ivone Benfatto, head of electrical engineering division.

ETAP is used by ITER for a full spectrum of power system design and analysis, including load flow, short circuit, motor starting, reliability, ground grid design, and more.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me