ISM Report: October manufacturing continues autumn rebound

ISM data shows manufacturing grew for second straight month as new orders, production jumps

11/01/2012


In the final report before the 2012 elections, the Institute for Supply Management reported Nov. 1 that manufacturing continued to improve from the summer slump and continued to grow at a steady rate.

The ISM report’s PMI index rose to 51.7% in October, up slightly from the 51.5% in September and above the 50% threshold for manufacturing growth. In addition, the index showed the economy as a whole grew for the 41st consecutive month.

“Comments from the panel this month reflect continued concern over a fragile global economy and soft orders across several manufacturing sectors," said Bradley J. Holcomb, CPSM, CPSD, chair of the Institute for Supply Management Manufacturing Business Survey Committee.

Other indices also were up in October, the second straight month of increases after a three-month stretch from June to August where the manufacturing rate hovered just below 50%.

The New Orders Index registered 54.2%, an increase of 1.9 percentage points from September. The Production Index registered 52.4%, an increase of 2.9 percentage points. On the other side of the equation, the Employment Index registered 52.1%, a decrease of 2.6 percentage points, and the Prices Index registered 55%, reflecting a decrease of 3 percentage points.

Respondents are concerned about the situation in Europe and Asia, while seeing firming demand in the U.S. Among the comments:

  • "Market is still very soft." (Paper Products)
  • "Business is picking up." (Furniture & Related Products)
  • "[Our] 4th quarters usually begin to show a slowdown in demand, and this year is no different; prices are also dropping." (Wood Products)
  • "Demand down slightly due to customers pre-buying ahead of announced material price increases." (Plastics & Rubber Products)
  • "The slowing of capital expenditure in Europe and China has lowered our backlog for Q4." (Computer & Electronic Products)
  • "Europe is still very much a concern. Global recovery is still fragile." (Chemical Products)

 THE LAST 12 MONTHS

Month

 

PMI 

 

 

 

Month

 

PMI 

 

Oct 2012

 

51.7

 

 

 

Apr 2012

 

54.8

 

Sep 2012

 

51.5

 

 

 

Mar 2012

 

53.4

 

Aug 2012

 

49.6

 

 

 

Feb 2012

 

52.4

 

Jul 2012

 

49.8

 

 

 

Jan 2012

 

54.1

 

Jun 2012

 

49.7

 

 

 

Dec 2011

 

53.1

 

May 2012

 

53.5

 

 

 

Nov 2011

 

52.2

 

Average for 12 months – 52.2
High – 54.8
Low – 49.6

 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.