Inverted flare zone valve for retrofit and new construction

This zone valve line uses microcircuit-based logic to control a gear-driven electronic actuator that drives a ball valve-based body design.

02/26/2015


This inverted flare zone valve is suited for retrofit and new construction work.This inverted flare zone valve is suited for retrofit and new construction work. The zone valves improve the overall performance of any hydronic system. This zone valve line uses microcircuit-based logic to control a gear-driven electronic actuator that drives a ball valve-based body design. The valve is available with either a normally open or normally closed actuator and can be installed in any direction, in any orientation. Ideal for use with heating and cooling applications, these valves are designed primarily for baseboard, fan coil, radiator, convector, heat pump, and radiant applications. The connection allows contractors to replace an existing inverted flare valve without having to cut and sweat pipe.

Taco

www.taco-hvac.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me