Integrators seek differentiation in building automation market

Integrators are putting an increasing emphasis on product choice and adding value to systems to better position themselves in a growing market where small- and medium-sized independent integrators accounted for 57 of the overall takings.

11/13/2013


With competition growing in the building automation market, systems integrators are placing increasing emphasis on product choice and adding value to traditional systems to better position themselves toward enhancing customer satisfaction, according to new findings from a report from IHS Inc. (NYSE:IHS). 

Revenue for global building automation systems (BAS) installation and aftermarket services was estimated to be worth $26.4 billion in 2012. Small- and medium-sized independent integrators accounted for an estimated 57% of the overall takings, as presented in the figure below.

This is a highly competitive space with no single independent integrator holding more than a 1 percent market share. Here independent integrators look for ways to differentiate themselves in order to win business. Such an activity is likely to take two forms: enhanced product representation; and adding value to traditional service contracts. 

“Integrators will choose the brands they represent very carefully,” said William Rhodes, senior market analyst, building technology, for IHS. “Many are finding that different users value varying levels of cost and specifications for the equipment, and integrators will try to cover most scenarios with their brand choice. In this case, the desire to have the latest technology must be balanced against reliability and the capability to integrate with legacy solutions.” 

Revenue for global building automation systems installation and aftermarket services was estimated to be worth $26.4 billion in 2012. Small- and medium-sized independent integrators accounted for an estimated 57 percent of the overall takings. Courtesy: I

Integrators often will identify the products that customers are likely to be asking for in the future, and start testing and analyzing them early with a view to integrating the products before demand picks up.

“Integrators also are looking for more ways to add value to the service they provide and improve their competitive positioning,” Rhodes continued. “Some integrators have started to provide building analytics to help customers save energy—through either building optimization or fault detection. With building analytics, integrators are able to provide proactive energy savings, which improves customer satisfaction.”

The brands that building automation integrators represent and the products they specify will become increasingly important for integrators that want to differentiate their offerings. Adding value to traditional service contracts will be critical for integrators to win market share in an increasingly competitive landscape.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Control noise, vibration in building design: Tackling acoustics and design issues; High-performance building design; NFPA 99; Combined heat, power
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me