Injection mixing system

Taco's LOFlo injection mixing system

08/31/2011


Taco’s LOFlo injection mixing system enhances the energy efficiency of chilled beam systems. When compared to traditional HVAC systems, radiant cooling and chilled beams reduce fan electrical energy demand and consumption up to 10 times. The challenge has been that pump energy demand doubles. Taco’s LOFlo injection mixing system solves this problem because its mixing block consists of a variable speed injection circulator and constant-speed zone circulator. The LOFlo system reduces the electrical energy demand of an all-air system by up to 40%. It also accomplishes chilled beam BTU transport with only one-third of the energy needed by chilled beam systems without injection mixing.

www.taco-hvac.com 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Economics of HVAC systems; NFPA 110-2016; Designing and choosing modular data centers
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me