Industrial strain-relief fittings

Kopex-Ex ISR Fittings from Thomas & Betts feature an integral clamping mechanism that enables the industrial strain-relief fittings to comply fully with the IEC's pullout requirements without external clamping.

04/14/2016


Kopex-Ex ISR Fittings from Thomas & Betts feature an integral clamping mechanism that enables the industrial strain-relief fittings to comply fully with the IEC's pullout requirements without external clamping. The Kopex-Ex ISR fitting was developed with input from end users in the oil and gas industry. This high-level solution for industrial end users looking for a superior-quality fitting reduces installation time and costs while surpassing global standards for pullout requirements. Its integral clamping mechanism was designed in response to industry end users who were looking for a quicker and easier way to install strain-relief fittings, as most strain-relief fittings are designed to meet only 25% of the IEC pullout requirements.

Thomas & Betts, ABB

www.tnb.com


This product is a Finalist in the
Consulting-Specifying Engineer 2016 Product of the Year program. View more Finalists and cast your vote at www.csemag.com/votepoy (voting closes June 30, 2016).



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me