Industrial shock-block GFCI

Littelfuse’s SB6100 Series Industrial Shock-Block GFCI is designed to meet UL 943C Class C and Class D and protect industrial workers against electrical shockers.

10/18/2013


Littelfuse’s SB6100 Series Industrial Shock-Block GFCI is designed to meet UL 943C Class C and Class D and protect industrial workers against electrical shockers. Courtesy: LittelfuseLittelfuse’s SB6100 Series Industrial Shock-Block is a ground fault circuit interrupter (GFCI) device designed to meet UL 943C Class C and Class D, allowing industrial workers to finally be protected against dangerous electric shock. If the wire is broken or becomes loose, the Littelfuse Shock-Block GFCI will signal an alarm and interrupt power. Without this feature, workers might wrongly assume they are protected even when the ground connection has failed. Even though UL requires a minimum short circuit current rating of 5,000 A, the Shock-Block GFCI device is tested up to 50,000 A. This eliminates the need for adding external fuses for short-circuit protection. The SB6100 Shock-Block GFCI is available as an open-chassis unit that is UL-recognized for installation by an OEM, or as an enclosed unit with a NEMA-4X UL-listed enclosure. 

Littelfuse

www.littelfuse.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me