Inductive sensors for extreme environments

Steute Xtreme's ATEX- IECEx Certified Inductive Sensors are designed for use in Zone 0 and 20 explosive atmospheres and extreme environments and are built with a stainless steel enclosure.

06/11/2013


Steute Xtreme's ATEX- IECEx Certified Inductive Sensors are designed for use in Zone 0 and 20 explosive atmospheres and extreme environments and are built with a stainless steel enclosure. Courtesy: Steute XtremeSteute Xtreme's line of ATEX- IECEx Certified Inductive Sensors are designed for use in Zone 0 and 20 explosive atmospheres and extreme environments. The units are available in M8, M12, M18 and M30 sizes with a cable or plug-in connector. Models are also available with IP68K or IP69K ratings and for temperature of -40° to +120°C. They are built with a stainless steel enclosure for enhanced protection and have flush mounting.

The inductive sensors are designed for industries like construction, conveyors, food and chemical processing, valve position monitoring, material handling, and the oil & gas industries.

Steute Xtreme

www.steutextreme.com 

See more Control Engineering sensor products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.