Increasing use of smart pumps to help drive down “Never Events”

Increased focus on providing optimum patient care in the most cost efficient way is fuelling demand for intelligent infusion devices termed “Smart Pumps.”


Increased focus on providing optimum patient care in the most cost efficient way is fuelling demand for intelligent infusion devices termed “Smart Pumps.” A report from InMedica, a division of IMS Research, recently acquired by IHS Inc., on the global market for infusion pumps found that, despite market saturation in the developed countries, demand for advanced technology is being maintained; infusion pump suppliers must offer technically advanced products at competitive prices to maintain market share.  Smart pumps with software to reduce the risk of dose error in IV therapy, to provide safer patient care, is becoming increasingly important, in the light of reimbursement restrictions for “never events” in U.S. hospitals. InMedica predicts the U.S. market for large-volume infusion pumps will increase to $500 million by 2015.

“Medication errors, during prescription, preparation or administration of medication, can lead to adverse drug events (ADEs). According to the National Health Service (NHS) in the U.K., intravenous (IV) pumps can account for up to 35 percent of medication errors,” comments Kelly Barritt of InMedica.

“It is becoming more apparent that systems need to be implemented to prevent such errors from occurring. Dose error reduction software is designed to check the information a physician programmes into a pump against the limits set by the drug library; the care-giver is then alerted of an error before infusion starts,” continues Kelly Barritt, Senior Market Analyst. As provision of care becomes increasingly pressured, with nurses and physicians often working long hours to meet patient demand, smart pumps will help to reduce errors.  Customers will favour products with higher levels of harm-reduction software to eliminate ADEs; use of the next generation of ‘Smart’ pumps will grow quickly. In addition, the number of devices for home use incorporating safety features is also increasing, further driving growth in this market.

Furthermore, in an attempt to drive down the cost of treatment, patient care is being transferred to lower-acuity departments and in some instances to the home; technology is developing as a result.  Radiofrequency identification (RFID) chips have been installed by some manufacturers in infusion pumps, to allow healthcare institutions to track their location. The RFID chips enable pumps to be quickly accessed, reducing the search times in large hospitals. Device tracking may also be successful in home-care environments, enabling the home-care agencies to monitor the locations of the pumps on loan.

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.