In-floor chilled beams

Tate’s in-floor active chilled beams bring water under the floor to cool air directly at the perimeter of a building, avoiding many concerns of overhead chilled beams including spider ducting, damage from leaking water lines, and latent loads producing condensation.

04/10/2012


In-floor active chilled beamsTate’s in-floor active chilled beams bring water under the floor to cool air directly at the perimeter of a building, avoiding many concerns of overhead chilled beams including spider ducting, damage from leaking water lines, and latent loads producing condensation. The beam catches cold air as it falls, heats it, and supplies the heated air to the space, saving energy and providing maximum heating performance. The three product options consist of a two-pipe model with supply and return water connections, a four-pipe model featuring two supply and two return water connections, and a two-pipe model using electric heat at the perimeter.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me