IEEE Adopts Proposal for Power over Ethernet

04/16/2007


A proposal allowing midspans used in Power-over-Ethernet applications to put the power onto the data pair as required for Gigabit systems was made by Phihong USA, Freemont, Calif., to the IEEE802.3at task force at its most recent meeting on March 13%%MDASSML%%15, 2007 in Orlando, Fla.

“Numerous presentations to the IEEE have proven that this can be done without affecting the‘channel characteristics’ as specified in IEEE802.3 specifications,” said Keith Hopwood, vice president of marketing for Phihong USA.

Putting the power on the data pair is required for Gigabit systems as all wires are used to carry data. If 4-pair powering gets ratified then it will also be required to carry power on all the wires that carry data as well.

Phihong officials claim that their PoE midspans already do this, and that many customers have already implemented this, although it is technically outside the current IEEE802.3 specification. This approved resolution puts specific text into the new specification that makes it official.

The new standard is now in draft, and many items can still change. The standard is still a year away from ratification, but it is now possible to build hardware that meets these requirements with a high degree of confidence that they will be compliant to the standard.

When implemented as a standard, IEEE 802.3at (PoEPlus) will not only allow POE in Gigabit systems but will enable at least 30 watts of power and potentially up to 60 watts.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me