Hydronic heat exchanger

With Mitsubishi Electric Cooling and Heating’s variable refrigerant flow PWFY hydronic heat exchanger, a closed-circuit water heater available in two sizes and configurations, daily cost of hot water generation is four times less than with a gas heater and 10 times less than with an electric heater.

04/10/2012


PWFYWith Mitsubishi Electric Cooling and Heating’s variable refrigerant flow PWFY hydronic heat exchanger, a closed-circuit water heater available in two sizes and configurations, daily cost of hot water generation is four times less than with a gas heater and 10 times less than with an electric heater. Using waste heat from the cooling cycle, this exchanger can heat water to 115 F and cool water to 50 F in the HEX configuration. In the booster unit configuration, it works with a compressor to heat water to 160 F. Three operation modes provide a full temperature range based on outdoor ambient temperature, and circulation to prevent pipe freeze. 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Pump technology design: Selecting pumps and pipes; Class A office buildings; NFPA 101-2015; ASHRAE 90.1 updates; Motors, drives, and HVAC efficiency
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me