Hybrid motor starter has energy efficient relay system

Siemens' Sirius 3RM1 hybrid motor starter is designed as both a direct-on-line starter and a reversing starter and has an energy-efficient relay system that reduces maintenance demands and extends the motor's life.

06/05/2013


Siemens' Sirius 3RM1 hybrid motor starter is designed as both a direct-on-line starter and a reversing starter and has an energy-efficient relay system that reduces maintenance demands and extends the motor's life. Courtesy: SiemensSiemens' Sirius 3RM1 hybrid motor starter is designed as both a direct-on-line starter and a reversing starter with integrated overload protection for smaller motors with a rating of up to 3 hp, used for fans, pumps and lifting gear, as well as in machine tools. At just 22.5 mm wide, the Sirius 3RM1 reduces space requirements in the control cabinet by up to 82%. The motor starter facilitates the requirement in modern plant and machinery construction for space-saving components.

The Sirius 3RM1 uses hybrid technology that combines the benefits of semiconductor and relay systems in one device: The low-wear semiconductor components are responsible for connection and disconnection operations while an energy-efficient relay system is used during operation. This extends the motor starter's service life and reduces maintenance demands. It also uses an infeed system for the motor starter.

As the main circuit is centrally connected to the infeed system, there is no need for separate wiring of the individual motor starters. The assembly with the infeed system is particularly suitable for conveyor systems in which a large number of motors are used on one conveyor belt. When maintenance is required, the individual motor starters from an existing assembly can be replaced with little effort thanks to the infeed system.

Siemens

usa.siemens.com 

See more Control Engineering motor and drive products.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me