HVAC, BAS in industrial facilities

Fifty-seven percent of respondents to the Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems (BAS) Study specify, design, or make product selections for industrial/manufacturing facilities/warehouses.

04/17/2017



The majority of engineers believe that keeping up with updates to codes and standards is challenging and greatly affecting the future of fire and life safety systems, engineers, and/or the industry. Source: Consulting-Specifying Engineer 2016 Fire and Life Safety StudyFifty-seven percent of respondents to the Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems (BAS) Study specify, design, or make product selections for industrial/manufacturing facilities/warehouses—and seven in 10 of these engineers are responsible for determining requirements/writing specifications and/or supervising or consulting on these projects. Below are five HVAC and BAS findings as they relate to industrial facility projects:

  1. Annual specified products value: The average engineering firm specifies $2.46 million in total HVAC and building automation/control products for new and existing industrial facilities on a yearly basis, with one-quarter of these firms specifying more than $5 million.
  2. Future of HVAC systems, BAS: When looking ahead to future industrial facility projects, HVAC system design will be most affected by energy efficiency requirements (56%), while BAS will continue to be challenged by designing for interoperability and complementing systems (69%).
  3. Researching systems: The average mechanical engineer spends 31% of their billable hours researching and/or specifying HVAC systems and BAS for industrial facilities. These engineers mostly refer to product specifications, best practices, and training/education offerings during this time.
  4. Important product considerations: When selecting HVAC products for industrial facilities, engineers compare product quality (83%), energy efficiency of a product (63%), and service support offerings (56%).
  5. HVAC, BAS specifications: Engineering firms most often write performance (83%), prescriptive (73%), or open (alternate or substitute; 63%) HVAC and controls specifications for industrial facility projects.

Seven in 10 engineering firms have recently specified pumps and pumping systems, fans and air movement, and air handlers into industrial facility projects. Over the next 12 to 24 months, firms have plans to specify chillers and chilled water systems (34%) and variable refrigerant flow systems (32%). Source: Consulting-Specifying Engineer

Other research notes:
of engineers currently specify electrical inspection and test equipment. Source: Consulting-Specifying Engineer 2016 Electrical and Power Study

1 in 5 engineering firms specifies less than $100,000 in lighting and lighting control products for new and existing buildings. Source: Consulting-Specifying Engineer 2017 Lighting and Lighting Controls Study

62% of mechanical engineers recommend the brand of HVAC systems, equipment, and/or controls to be used in a project. Source: Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems Study

View more information at www.csemag.com/2015HVACBAS. Amanda Pelliccione is the research director at CFE Media.

More research

Consulting-Specifying Engineer covers several research topics each year. All reports are available at www.csemag.com/research



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Designing for energy efficiency; Understanding and applying NFPA 101 for mission critical facilities; Integrating commissioning and testing for fire alarm systems; Optimizing unitary pumping solutions
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
click me