Ground fault protector

ABB’s F200 Ground Fault Equipment Protector (GFEP) is designed to protect equipment against damaging line-to-ground currents and can be applied to most electrical networks.

07/25/2013


ABB’s F200 Ground Fault Equipment Protector (GFEP) is designed to protect equipment against damaging line-to-ground currents and can be applied to most electrical networks. Courtesy: ABBABB’s F200 Ground Fault Equipment Protector (GFEP) is designed to protect equipment against damaging line-to-ground currents by disconnecting all ungrounded conductors of the faulted circuit. The ABB F200 GFEP line consists of the 2-pole F202 for single-phase networks and the 4-pole F204 for split phases, Delta, and Wye networks. The F200 GFEP detects ground faults by continuously measuring the current balance between live conductors and the neutral using a toroidal current transformer. F200 GFEP devices can be applied to most electrical networks up to 480Vac and can be installed in distribution panels and on critical equipment. They are suitable for a variety of industrial and commercial applications including: oil and gas, water and wastewater treatment, water pumps for fountains and irrigation, pharmaceutical manufacturing, semiconductor facilities, outdoor installations, and heating equipment 

ABB 

www.abb.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me