GPS Helps Navigate More Than the Road

As part of my becoming chief editor of CSE, my wife, Amanda, and I agreed to relocate from Portland, Ore., to the Chicago area. Selling a house, finding a new place and preparing for an interstate move had our plate so full we couldn't spend a lot of time planning the long and logistically complex drive (pet-friendly hotels are few and far between these days).

04/01/2007


As part of my becoming chief editor of CSE , my wife, Amanda, and I agreed to relocate from Portland, Ore., to the Chicago area. Selling a house, finding a new place and preparing for an interstate move had our plate so full we couldn't spend a lot of time planning the long and logistically complex drive (pet-friendly hotels are few and far between these days). So, I bought a GPS. And, being a techno geek, I spent as much time researching GPS devices as we spent on planning the trip (shhhh). In the end, considering price vs. features, I bought a good one, justifying that it would help us navigate the intense traffic of Chicago.

I was able to learn the most important features quickly enough, and before we left, I punched in all of the addresses where we would be staying. As a backup, I also searched MapQuest for the driving directions and printed them out for Amanda. And as an extra backup, we threw the road atlas into her car for good measure. Three generations of technology should get us there without too many hassles…

Minutes after the moving truck left, so did we. Everything worked perfectly until we departed early one morning from our hotel in Layton, Utah. The highway was only a short drive, but the GPS directed us to city streets—in the opposite direction. I browsed the GPS unit to ensure that we were on the right track, and didn't worry too much. In my research I had read that it's not uncommon to get directions that you won't expect, which are not only right but time-savers, too. Amanda, however, hadn't done that research.

My cell phone rang. I explained to her that it was fine. She hung up. A few minutes later, she called again and was adamant about stopping to look at a map. We were only a few miles from the highway then, and I had to break hard to pull into the only visible place left to stop before getting to the highway.

A discussion ensued, and I realized that we were in one of those situations where so many people find themselves today when it comes to technology, and that includes discussions about building automation systems and controls, Internet-based project management, electronic-document-management systems and telecommunications technologies.

On the one hand, we have people who are adept at using digital technologies and capable of learning quickly. And on the other hand, we have those who, no matter how intelligent and experienced, are decidedly not adept at digital technologies, being forced to trust or at least follow the people who are. Even the perception of failure is different: with even one instance of a failure, some are willing to unplug from the whole thing forever, while others accept it as a temporary setback and keep moving ahead.

We worked through the situation, and I gained a fresh appreciation of the chasms that exist not only between technologies but between the people who use them. In answer to the question, “Can't we all get along?” the answer is yes.

Send your questions and comments to: Michael.Ivanovich@reedbusiness.com





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me