Government building design: Codes and standards

When your client is the government, engineering design can be tricky, thanks to stepped-up regulations, budgetary concerns, and other considerations. Respondents discuss the intricate codes and standards for government, state, municipal, federal, and military facilities.

04/23/2015


 

Respondents: Ian Bost, PE, LEED AP Principal, Mechanical Engineer Baird, Hampton & Brown Inc. Fort Worth, Texas Robert Eichelman, PE, LEED AP Technical Director EYP Architecture & Engineering Albany, N.Y. Paul W. Johnson, PE, LEEP AP BD+C Vice President o

Respondents

  • Ian Bost, PE, LEED AP, Principal, Mechanical Engineer, Baird, Hampton & Brown Inc., Fort Worth, Texas
  • Robert Eichelman, PE, LEED AP, Technical Director, EYP Architecture & Engineering, Albany, N.Y.
  • Paul W. Johnson, PE, LEEP AP BD+C, Vice President of Mechanical Engineering, Wood Harbinger, Bellevue, Wash.
  • Katie McGimpsey, PE, LEED AP, Principal, Affiliated Engineers Inc., Rockville, Md.
  • R. Scott Pegler, PE, LEED AP, Director of Mechanical Engineering, Setty, Fairfax, Va.

Figure 1: The U.S. Navy engaged the engineering team at Wood Harbinger to demolish its outdated Naval Base Kitsap Pier B and replace it with a state-of-the-art pier that better supported its Nimitz class nuclear aircraft carriers, as well as future classCSE: What codes, standards, or guidelines do you use as a guide as you work on these facilities?

Johnson: ASHRAE, UFC, International Green Construction Code (IgCC), International Mechanical Code (IMC), International Building Code (IBC), National Fire Code (NFC), NFPA, Whole Building Design Guide, NAVSEA OP-5, etc.

Bost: Those include LEED guidelines, ASHRAE 90.1, and ASHRAE 62.1.

McGimpsey: The National Institutes of Health (NIH) Design Requirements Manual (DRM), UFC, ASHRAE, NFPA, American Society of Mechanical Engineers (ASME) Codes, IBC, IMC, International Energy Conservation Code (IECC), Biosafety in Microbiological and Biomedical Laboratories (BMBL), ANSI Z9.5, IEEE, International Plumbing Code (IPC), IFC, and ANSI Z358.1.

Pegler: The federal government uses PBS P100 for most public buildings. The military uses UFC with specific guidelines and criteria within branches like NAVFAC and Army/COE.

CSE: How have Unified Facilities Criteria, Energy Star, ASHRAE, U.S. Green Building Council, etc., affected your work on government and military projects? What are some positive/negative aspects of these guides?

Bost: Those standards have generally forced owners to improve ventilation rates and install efficient systems.

Johnson: The UFC is difficult to use due to the volume of information, but on the other hand it is very specific, so what is needed is well defined. The UFC is not recognized as being as "green" as it could be and thus sometimes conflicts with the other codes and standards. The other guidelines and codes are standard use tools, so there isn't any impact on government projects.

CSE: Which code/standard proves to be most challenging in such facilities?

Bost: ASHRAE 189.1.

CSE: Do you find codes affecting government and military structures to be more or less taxing than those impacting work on other building types? If so, in what ways?

Johnson: Yes, they are more limiting to design flexibility and product selection.

Bost: There is more paperwork on government and military projects.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me