Going Beyond "Potty Parity" in Chicago

Along with a host of changes now being adopted by the city of Chicago's plumbing code, the number of toilets in newly constructed or substantially retrofitted large venues has essentially doubled. "It's about time," says Kenneth Wentink, P.E., Cosentini Associates Inc., Chicago. "The 'potty parity' discussion has been going on a long time.

05/01/2001


Along with a host of changes now being adopted by the city of Chicago's plumbing code, the number of toilets in newly constructed or substantially retrofitted large venues has essentially doubled.

"It's about time," says Kenneth Wentink, P.E., Cosentini Associates Inc., Chicago. "The 'potty parity' discussion has been going on a long time. It's nice to see that Chicago is jumping ahead."

Armed with the new code, engineers can now be part of the solution to the perennial long lines at ladies' rooms that are always found at stadiums, ballparks and theaters.

For example, according to Chicago's code, the numbers of required commodes at a 3,000-seat indoor theater have increased from 11 to 37 for women, and from 10 to 18 for men. At a 60,000-seat outdoor stadium the changes are even more significant: 66 to 410 toilets for women, and 66 to 205 for men.

"The plumbing code hasn't been rewritten since 1951, and it reflected very old building practices," explains Kristen Cabanban, spokesperson for the Chicago Department of Buildings. "This is our opportunity to bring the codes into the 21st century."

Cabanban also notes that the potty parity changes have attracted lots of national and media attention.

Wentink, who is also vice president of the American Society of Plumbing Engineers' research foundation, predicts that all this publicity may lead to similar changes in the national codes.

In addition to the new toilet requirements, John Bukalski, P.E., Environmental Systems Design, Chicago, points out a number of other Chicago plumbing code changes, including:

  • Floor drains are required in public toilet rooms.

  • Water pressure can be 100 psi in high-rise buildings.

  • Grease traps are no longer required at pantry sinks.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me