GM Lab Exemplifies Hazardous Design

As the largest noise, vibration and harshness lab in North America, the design of General Motor's 347,000-square-foot Noise and Vibration Analysis Laboratory in Milford, Mich., involved comprehensive hazardous area design by engineers from HarleyEllis, Southfield, Mich.

11/01/2000


As the largest noise, vibration and harshness lab in North America, the design of General Motor's 347,000-square-foot Noise and Vibration Analysis Laboratory in Milford, Mich., involved comprehensive hazardous area design by engineers from HarleyEllis, Southfield, Mich.

In its research areas, the building contains 11 engine dynamometer test cells used to benchmark GM's components against its competition. The complex nature of the space dictated the implementation of 100-percent fresh-air systems to eliminate the possibility of carbon-monoxide and hydrocarbon buildup within each cell. Additionally, carbon-monoxide and hydrocarbon gas-detection systems were installed to alert staff of potential health risk. High-temperature carbon-monoxide exhaust systems dismisses excessive exhaust temperatures during engine backfires.

During actual research periods, test engines are run until failure, increasing the need for fire protection. A carbon-dioxide fire-suppression system was designed for this purpose. Fuel piping is located underground, outside of the building envelope, to minimize internal leakage. Each fuel pipe is further contained within conduit to eliminate environmental contamination. Additionally, the building structure is designed with exterior blowout panels to channel explosive force away from the facility.

Each laboratory contains an integrated set of systems controls, enabling each cell to operate on its own system, maximizing consistency and efficiency. Intrinsically safe electrical devices provide maximum reliability.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Emergency lighting; NFPA 3 and 4; Integrated building systems; Smart lighting, HVAC design
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me