Gigabit Ethernet used in new packaging machine

Case study: Newly designed thermoformer packaging machine with programmable logic controller, servo motors and drives, and I/O modules uses a Gigabit Ethernet bus network.

08/24/2012


VC999 Packaging Systems i-Series Thermoformer packaging machine uses CC-Link IE Field Ethernet communications to connect the programmable logic controller and other automation in this seal station enclosure with the form and discharge stations. Courtesy:The i-Series Thermoformer from VC999 Packaging Systems is a new generation in packaging technology using a Gigabit Ethernet industrial network for communications. Modular design objectives had to easily and quickly facilitate changes in length, width, and options; allow for post installation expandability based on customer demands; and reduce assembly, shipping, and installation costs. 

VC999 also specified that the new design would use leading-edge and best-in-class technology where possible, if determined to be beneficial and cost-effective.

In response to VC999’s requirements, Power Motion Inc. helped develop a control solution that met design objectives. The new machine made its debut at Interpak in Düsseldorf, Germany, in May 2011.

VC999 engineers interviewed multiple potential vendors and selected a programmable logic controller (PLC), servo motors, and variable frequency drives (VFDs), and CC-Link IE Field Ethernet bus network.

Machine design, segments

VC999 Packaging Systems i-Series Thermoformer packaging machine uses CC-Link IE Field Ethernet communications, I/O connections, analog modules, temperature control, servo, and other communications in this form station enclosure with the seal and dischargThe i-Series machine is built, shipped, and installed based on these three segments (form, seal, and discharge); each segment has its own control enclosure connected by the Ethernet network.

The seal station electrical enclosure, located in the middle of the machine, is the main control panel and contains the PLC. The form and discharge station electrical enclosures are remote stations, located on either end.

The form station includes a CC-Link IE field head module, I/O connection, analog modules, and temperature control, and a servo controlling the bottom film unwind area.

VC999 Packaging Systems i-Series Thermoformer packaging machine uses CC-Link IE Field Ethernet communications to connect three enclosures. This one, called the discharge station, has a CC-Link IE field head module, I/O module, and analog control, along wiThe seal station includes the PLC, I/O connections, analog modules, temperature control, and the CC-Link I/E Field Master Module, along with a servo controlling the machine’s top film unwind function.

The discharge station includes a second CC-Link IE field head module, I/O module, and analog control, along with VFDs for trim wind-up motor control and servos to control the main index, punch and printer options, and rotary knife.

Servos are being controlled via analog signal or a proprietary motion control bus network, depending on the specific axes, and the VFDs are being controlled via analog signal. Future designs may incorporate all CC-Link IE Field network communications.

The back view of the VC999 i-Series Thermoformer shows the closed form, seal, and discharge enclosures, left to right; CC-Link Gigabit Ethernet connect the three enclosures. Courtesy: Mitsubishi Electric, CC-Link Partner Association - AmericasVC999 specified that the control system bus network be Ethernet-based and connect the main electrical enclosure (seal station) with the electrical enclosures located at the form and discharge stations to:

  • Simplify wire management
  • Reduce wire cost
  • Reduce wiring labor
  • Simplify machine breakdown for shipment
  • Simplify machine installation at the customer site.


In addition, Ethernet bus networks are the preferred choice for new machine designs. CC-Link IE Field Ethernet based bus network is the fastest and the first 1 Gigabit per sec Ethernet based network for automation control. Other networks operate at 10/100 Mbps. (Gbps is 1000 Mbps, 100 or 10 times faster.)

The i-Series Thermoformer, from VC999 Packaging Systems, is a new generation in packaging technology using a Gigabit Ethernet industrial network for communications. Courtesy: Mitsubishi Electric, CC-Link Partner Association - Americas

More on the machine, company

The new i-Series is designed for medium- to large-volume packaging operations, and features a new hygienic design and operating system. VC999 is part of a privately held company, The Inauen Group, which has multiple brands and locations, including XtraPlast.com, Perbetum Smart Automation, and XtraVac. Each location is managed independently and cooperatively, under the group name.


A global provider in the design and manufacturing of vacuum packaging machine systems, VC999’s products include thermoforming machines, chamber machines, tray sealing machines, and shrink packaging machines/dryers.

- Terry Carson is vice president of Sales-Power Motion Inc., a multi-vendor automation distributor and system integrator, www.powermotionsales.com. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske(at)cfemedia.com.

www.vc999.com 

www.cclinkamerica.org

ONLINE

“Technologies inside: Gigabit Ethernet, PLC, servos, drives for new packaging machine” contains product details. See link at bottom.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2014 Product of the Year finalists: Vote now; Boiler systems; Indirect cooling; Integrating lighting, HVAC
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.