Get AutomationDirect DINnector products in smaller quantities

AutomationDirect now offers popular screw terminal blocks, ground terminal blocks, supplementary protectors, end brackets, and DIN rail in smaller quantities than previously.

07/01/2010


Select DINnector Products Available in Smaller QuantitiesAutomationDirect  offers a selection of popular screw terminal blocks, ground terminal blocks, supplementary protectors, end brackets, and DIN rail in smaller quantities.

DINnector resettable supplementary protectors are now available in single-piece and 20 packs. Supplementary protector prices start at $10 for single pieces.

A selection of screw-type terminal block sockets for the protectors, with and without LED indicators, can now be purchased in both five-packs and 50-pack quantities, starting at $7 for a five-pack. Terminal block spacers and separators are available in 10-packs and 50-packs, starting at $3.

Grounding terminal blocks that accept six to 10 AWG wires are available in quantities of 10 and 50, starting at $24 (10/PK).

DIN rail can now be purchased in packs of two as well as boxes of 10. The 1-meter pieces start at $6 for a two-pack. End brackets are also available in 10-packs and 50-packs, starting at $6.50 (10/PK). The company made the announcement June 23, 2010.

To view the full line of Dinnector terminal blocks and accessories, visit: www.automationdirect.com/terminal-blocks .

AutomationDirect, based in Cumming, GA, says it sells more than 8,500 products through its Online Automation Superstore and 2,200-page catalog. The company says its automation products are often priced below the industry average, with 24-hour order entry and same-day shipping on in-stock items, outstanding sales and technical support, and a 30-day money-back guarantee on almost every product.

www.automationdirect.com

See also the System Integration channel from Control Engineering.

- Edited by Mark T. Hoske, Control Engineering content strategist, www.controleng.com.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me