FSMA Fact Sheet

Implementation of the Food Safety Modernization Act (FSMA) in 2014 will have an impact on the production, distribution and transportation of food in the United States.


Implementation of the Food Safety Modernization Act (FSMA) in 2014 will have an impact on the production, distribution and transportation of food in the United States. According to the FDA, which will oversee the new regulations, “the legislation transforms FDA’s approach to food safety from a system that far too often responds to outbreaks rather than prevents them. It does so by requiring food facilities to evaluate the hazards in their operations, implement and monitor effective measures to prevent contamination, and have a plan in place to take any corrective actions that are necessary.”

The impact on the manufacturing sector is going to be significant. Among the requirements in the FSMA that affect manufacturing:

Mandatory preventive controls for food facilities: Food facilities are required to implement a written preventive controls plan.  This involves:

  • Evaluating the hazards that could affect food safety
  • Specifying what preventive steps, or controls, will be put in place to significantly minimize or prevent the hazards
  • Specifying how the facility will monitor these controls to ensure they are working
  • Maintaining routine records of the monitoring
  • Specifying what actions the facility will take to correct problems that arise. 

Mandatory produce safety standards: The FDA must establish science-based, minimum standards for the safe production and harvesting of fruits and vegetables.  Those standards must consider naturally occurring hazards, as well as those that may be introduced either unintentionally or intentionally, and must address soil amendments (materials added to the soil such as compost), hygiene, packaging, temperature controls, animals in the growing area and water.

Authority to prevent intentional contamination: The FDA must issue regulations to protect against the intentional adulteration of food, including the establishment of science-based mitigation strategies to prepare and protect the food supply chain at specific vulnerable points.  (Final rule due 18 months following enactment)

Among the new tools covering inspection are:

  • Mandated inspection frequency:  The FSMA establishes a mandated inspection frequency, based on risk, for food facilities and requires the frequency of inspection to increase immediately.  All high-risk domestic facilities must be inspected within five years of enactment and no less than every three years thereafter.  Within one year of enactment, the law directs FDA to inspect at least 600 foreign facilities and double those inspections every year for the next five years.
  • Records access: FDA will have access to records, including industry food safety plans and the records firms will be required to keep documenting implementation of their plans.
  • Testing by accredited laboratories:  The FSMA requires certain food testing to be carried out by accredited laboratories and directs FDA to establish a program for laboratory accreditation to ensure that U.S. food testing laboratories meet high- quality standards. 

For specific information about FSMA, go to the FDA Website, www.fda.gov.

(Source: FDA)

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Salary survey: How much are you worth?; Dedicated outdoor air systems; Energy models and lighting
Fire, life safety in schools; Fire protection codes; Detection, suppression, and notification; 2015 Commissioning Giants; Emergency and standby power in hospitals
HVAC and building envelope: Efficient, effective systems; Designing fire sprinkler systems; Wireless controls in buildings; 2015 Product of the Year winners
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Implementing microgrids: Controlling campus power generation; Understanding cogeneration systems; Evaluating UPS system efficiency; Driving data center PUE, efficiency
Optimizing genset sizing; How the Internet of Things affects the data center; Increasing transformer efficiency; Standby vs. emergency power in mission critical facilities
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.