Fittings for grooved copper tube

Installation-Ready fittings are designed for grooved copper tube and integrate couplings into the cast fitting housings at each connection point.

03/21/2016


Installation-Ready fittings are designed for grooved copper tube and integrate couplings into the cast fitting housings at each connection point. Courtesy: VictaulicVictaulic's Installation-Ready fittings are designed for grooved copper tube and integrate couplings into the cast fitting housings at each connection point. Grooved copper tube and accessories are joined to the fitting by pushing the tube or accessory into the fitting outlet and tightening the bolts and nuts. The fittings can be removed and reinstalled as needed without having to cut into the copper tube. The fittings can be installed without heat or flame and feature no loose parts that can be dropped or lost. Installation-Ready fittings are UL-classified in accordance with ANSI/NSF 61 for cold and hot potable water service and ANSI/NSF 372.

Victaulic

www.victaulic.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me