First statewide green building code released

The state of California recently adopted the new Green Building Code, making California the first state in the nation to develop such a policy. The new building code, adopted by the California Building Standards Commission, will be amended for publication in the 2007 California Green Building Standards Code, CCR, Title 24, Part 11.

08/01/2008


The state of California recently adopted the new Green Building Code , making California the first state in the nation to develop such a policy. The new building code, adopted by the California Building Standards Commission, will be amended for publication in the 2007 California Green Building Standards Code, CCR, Title 24, Part 11.

The new code calls for a 20% improvement in water use efficiency, 50% increase in water conservation, and 15% reduction in energy consumption in all new construction. The code is voluntary until 2010, when all new construction must comply. “By adopting this first-in-the-nation statewide green building code, California is again leading the way to fight climate change and protect the environment,” Gov. Arnold Schwarzenegger said in a statement.

The new green building standard in California will not remain unique for long. Though California is the first state to adopt its own green code, cities such as New York and Chicago have their own sustainability requirements, and some associations are pursuing national standards. The International Code Council (ICC) has been working with the National Assn. of Home Builders to develop a national standard for green homes, and the American National Standards Institute is working on a standard as well.

The issue of a uniform compliance with other councils, agencies, and green building codes is the new task facing the states as individuals and the nation as a whole. The development of state-by-state codes, instead of a national policy, will hinder the overall process of developing more green buildings. “What California has done is not an ICC code,” said Steve Daggers, vice president of communications for the ICC, Washington, D.C. “Until something is adopted, it’s just a piece of paper.” It also should be remembered, Daggers said, that any new code is a baseline, rather than a ceiling.





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Combined heat and power; Assessing replacement of electrical systems; Energy codes and lighting; Salary Survey; Fan efficiency
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me