Fire suppression system

The INERGEN clean-agent fire suppression system provides a regulated agent discharge into the protected hazard area.

07/13/2015


The INERGEN clean-agent fire-suppression system provides a regulated agent discharge into the protected hazard area. Courtesy: Tyco Fire Protection Products The iFLOW system reduces pressure spikes in the distribution pipe network during discharge. This allows for the use of smaller-diameter, lower pressure-rated piping and reduced pressure-relief venting requirements. The iFLOW valve reduces the peak pressure and regulates the flow at a nominal pressure of 60 bar (870 psi) in the 300-bar (4,350-psi) system. The horizontal check valve minimizes installation time by facilitating the in­terconnection of containers. The matrix system offers design flexibility and adaptation to complex archi­tectural spaces. The iFLOW system can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, ventilation control, door closures, or other aux­iliary shutdown or activation functions.

Tyco Fire Protection Products

www.tycofsbp.com



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me