Fire, life safety in office buildings

The 2016 Fire and Life Safety Study provides details about fire, life safety in office buildings.

05/25/2017


Figure 2: The most commonly specified systems for office buildings include fire, smoke, heat, and linear detection (82%); smoke detection, control systems, dampers, etc. (77%); and water-based and sprinkler suppression (61%). Courtesy: Consulting-Specifying EngineerThree-quarters of respondents to the Consulting-Specifying Engineer 2016 Fire and Life Safety Study specify, design, or make product selections for office buildings—and 84% of these engineers are responsible for determining requirements and/or writing specifications for these projects. Below are five fire and life safety findings as they relate to office building projects:

1. Annual specified systems value: On average, respondents' firms specify $2.18 million annually in fire and life safety systems for office buildings; 25% specify more than $3 million.

2. Specifications written: Performance (81%) and prescriptive fire and life safety specifications (63%) are most frequently written for office buildings, followed by open specifications.

3. Future of fire, life safety systems: The subjective interpretation of regulations by code authorities (70%) and an inadequate budget for good design (66%) are the top issues affecting the future of fire and life safety system design in office buildings.

4. Disciplines impacting design: Local authorities having jurisdiction or local fire officials have the most impact on office building fire and life safety design, according to 74% of respondents. Owners, architects, and electrical engineers also have a generous say in these designs.

5. Product factors: When selecting fire and life safety products for office buildings, the most important factors that engineers consider are product quality (72%), a manufacturer's reputation (44%), and the availability of service support (44%).

View more information at www.csemag.com/2016FireLifeSafety. Amanda Pelliccione is the research director at CFE Media, apelliccione@cfemedia.com.


 Figure 1: Thirty-eight percent of engineers agree that having an inadequate budget for good design is extremely difficult in electrical or power systems and design. Source: Consulting-Specifying Engineer 2016 Electrical and Power Study63%: The average percentage of an engineer’s time that is spent on billable hours when working on lighting and/or lighting controls projects. Source: Consulting-Specifying Engineer 2017 Lighting and Lighting Controls Study

27% of firms specified more than $5 million in HVAC and building automation/control products for new and existing buildings in 2015. Source: Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems Study

2 in 5 engineers reported that facility owners have the most input and impact on fire and life safety design. Source: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

More research
Consulting-Specifying Engineer covers several research topics regularly. All reports are available at www.csemag.com/research



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me