Fire, life safety in educational facilities

Respondents to the Consulting-Specifying Engineer 2016 Fire and Life Safety Study identified 5 findings as they relate to K-12/college/university projects.

12/15/2016


Fifty-six percent of respondents to the Consulting-Specifying Engineer 2016 Fire and Life Safety Study specify, design, or make product selections for educational facilities-and 9 in 10 of these engineers are responsible for determining requirements/writing specifications for these projects. Below are 5 fire and life safety findings as they relate to K-12/college/university projects:Figure 2: When selecting fire and life safety products for educational facilities, the most important factors that engineers consider are product quality (98%), a manufacturer’s reputation (94%), and the availability of service support (89%). Courtesy: Co

  • Products specified: The most commonly specified systems for educational facilities include fire, smoke, heat, and linear detection (81%); smoke detection, control systems, dampers, etc. (77%); and network and intelligent fire alarm control panels (63%).
  • Annual specified systems value: On average, respondents' firms specify $2.58 million annually in fire and life safety systems for educational facilities; 31% specify more than $3 million.
  • Specifications written: Performance (79%) and prescriptive specifications (64%) are most frequently written for educational facilities, followed by open specifications (proprietary, 50%).
  • Future of fire, life safety systems: The subjective interpretation of regulations by code authorities (74%) and an inadequate budget for good design (64%) are the top issues affecting the future of fire and life safety system design in educational facilities.
  • Disciplines impacting design: Local authorities having jurisdiction or local fire officials have the most impact on educational facility fire and life safety design, according to 76% of respondents. Owners and architects also have a generous say in these designs.


Figure 1: The two most critical issues affecting the future of electrical or power systems are budget/cost and the lack of a skilled workforce. Courtesy: Consulting-Specifying Engineer 2016 Electrical and Power Study8 in 10 lighting engineers currently specify LEDs; lighting controls; and/or T5, T8, or T12 (any size) fixtures. Courtesy: Consulting-Specifying Engineer 2015 Lighting and Lighting Controls Study

3/4 of mechanical engineers determine requirements/write specifications for HVAC systems, equipment, and controls. Courtesy: Consulting-Specifying Engineer 2015 HVAC and Building Automation Systems Study

65% of fire protection design engineers usually write prescriptive fire and life safety system specifications. Courtesy: Consulting-Specifying Engineer 2016 Fire and Life Safety Study

More Research

Consulting-Specifying Engineering covers sever research topics each year.


View more information at www.csemag.com/2016FireLifeSafety. Amanda Pelliccione is the research director at CFE Media.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me