FEMP Designates NEMA Premium Motors as Standard for Federal Facilities


The Federal Energy Management Program (FEMP) has accepted a recommendation from the National Electrical Manufacturers Assn. (NEMA) to make mandatory federal purchase of NEMA Premium motors in federal facilities.

“Adoption of NEMA Premium by FEMP as the federal motors efficiency standard clearly signals our country's willingness to save energy and reduce greenhouse gas emissions,” said Emerson Motor Company's Rob Boteler, chairman of NEMA’s Motors and Generators Section Energy Management Task Force. “NEMA fully expects many industrial and commercial motors users to follow the federal example and specify only NEMA Premium motors.”

FEMP issued federal notice last week of a new standard to all federal agencies on the procurement of premium efficient motors. The comments to the agency, jointly submitted by the American Council for an Energy Efficient Economy and NEMA, are the basis for the standard.

Specifically, EPAct 2005 section 104 requires that federal agencies procure only Energy Star-qualified products or FEMP-designated products.

This key provision requires that agencies use the premium efficiency definition consistent with the criteria for Energy Star and FEMP-designated products when specifying procurements involving energy-consuming products and systems. Such specifications must be included in all construction, renovation and services contracts that include provision of energy-consuming products and systems. They must also be used in the evaluation criteria of offers received in response to competitive solicitations.

Finally, section 104 requires that Energy Star products and FEMP-designated products shall be clearly identified and prominently displayed in any inventory or listing of products by the General Services Administration (GSA) or the Defense Logistics Agency (DLA). The act directs GSA and DLA to supply only Energy Star products or FEMP-designated products for all product categories covered by these programs, except in cases where the purchasing agency specifies in writing that (1) no Energy Star product or FEMP-designated product is available that would meet the buyer's functional requirements, or (2) no such product is cost-effective.

The new FEMP specifications are based on the efficiency criteria set by the NEMA Premium Efficiency Motors Program. For low-voltage motors up to 200 HP, the same FEMP and NEMA Premium efficiency criteria are also used by CEE's Premium Efficiency Motors Initiative. FEMP has now extended the designation of premium-efficient motors to include medium-voltage electric motors (up to 5 kV) with rated capacities up to 500 HP.

Click here for more information .

No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Commissioning lighting control systems; 2016 Commissioning Giants; Design high-efficiency hot water systems for hospitals; Evaluating condensation and condensate
Solving HVAC challenges; Thermal comfort criteria; Liquid-immersion cooling; Specifying VRF systems; 2016 Product of the Year winners
MEP Giants; MEP Annual Report; Mergers and acquisitions; Passive, active fire protection; LED retrofits; HVAC energy efficiency
Driving motor efficiency; Preventing Arc Flash in mission critical facilities; Integrating alternative power and existing electrical systems
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Designing generator systems; Using online commissioning tools; Selective coordination best practices
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me