Fall protection again leads OSHA Top 10 violations

Citations for safety violations increase 56% in 2013

10/01/2013


Fall protection is once again the top OSHA-cited workplace safety violation with more than 8,000 citations. Fall protection is the annual leader in the OSHA Top 10 Violations list, which was announced Oct. 1 at the annual National Safety Congress in Chicago. The 2013 Congress marks the 100th anniversary of the National Safety Council’s charter.

The 10 top OSHA violations (along with the associated OSHA standard) are:

There were 42,502 violations in the OSHA Top 10 in 2013, a 56.3% increase from the 27,186 in the OSHA Top 10 in 2012.

This year’s Top 10 list differs only in the order of finish and in the number of violations. The first four remain unchanged from 2012, but there were almost 1,000 more citations in 2013 for fall protection than in 2012. Wiring methods moved from eighth to fifth on this year’s list, which machine guarding dropped from sixth to tenth.

“Today’s presentation reminds us that it’s very important to learn from the past and address these top violations to help make our workplaces safer,” said National Safety Council president and CEO Janet Froetscher.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me