Factory tour advice

Think Again: Recent factory tours offer critical advice to help manufacturers gain efficiency, quality, and more.

04/11/2012


Manufacturers need to seek ways to lower operating costs, energy use, and downtime; increase reliability and quality; and seek improvements throughout a product’s lifecycle. Also, look at the advantages of upgrades before parts wear out. Go to customers’ sites, and if you run into challenges, improve based on what you’ve learned.

Gears and gearboxes for windmills, tide generators, concrete mills, mining machinery, geared motors, conveyors, locomotives, and other applications are manufactured by Siemens, though most at the Siemens Tollgate mechanical drive facility are for wind appThese were bits of advice from a March Siemens Mechanical Drives plant tour in Elgin, Ill. Aarnout Kant, general manager of the Siemens Industry mechanical drives unit, and other experts offered advice, along with Peter Herzhoff and Jacob Schiff, mechanical drives plant managers for two Elgin, Ill., plants. 

- Simplify and integrate systems, cutting out components and even unneeded features where practical, to improve reliability and energy efficiency. In motion systems, fewer points of power transfer increase overall system efficiency. And an integrated system eliminates any possibility of finger-pointing in the rare case of a failure, adding customer confidence. Using 3-D modeling software speeds development.

- Look for features and functions that reduce downtime in the long term; though they may add to initial capital costs, they almost always result in a “yes” from end users interested in maximizing productivity.

At the Siemens Madeline plant, in addition to providing gearboxes for wind turbines, gearboxes are reworked and refurbished at a savings to buying new. Mark T. Hoske photo, CFE Media- Use long-time employees with more experience to contribute, mentor, and teach younger team members.

-Ask plant-floor personnel for their ideas to improve safety, eliminate waste, and improve efficiency, and reward them for their efforts.

- Invest in local manufacturing expertise in ways that logistic costs and lower lead times for customers, which helps add market share. Use sensors to take critical measurements, and invest in new computers and new software to monitor and processes to keep quality high. 

- Especially with expansions, renovations, and new plants, find ways to ensure products keep moving from design through manufacturing and shipping, limiting travel time and distance.

- Expand markets by adapting or scaling systems larger, when practical, to add efficiencies, and then seek new markets for those new designs.

- Shift toward service or upgrades in mature markets and consider leaving or selling lower efficiency product lines.

- Re-examine markets you left, because there might be good reasons to reinvest and return.

- Look for opportunities to add throughput and energy efficiencies with replacements.

- For critical parts, track the origin, number the parts with serial numbers or data matrix codes, and inspect everything, at multiple stages of production. Ensure suppliers provide parts or materials that are tested.

- Line up agreements from multiple suppliers, especially in tight markets like specialty steel, to lower lead times for customers.

- Set up key metrics for each area of the plant, display them, and discuss daily—or more often, if needed.

- Reconsider processes, even ones deemed efficient, when brought from other plants.

Share the fun

Mark T. Hoske is content manager, Control Engineering, CFE MediaHearing about a factory tour is almost as much fun as taking one. As you travel, ask nearby partners or suppliers for a plant tour. Ask questions. Learn. Then apply and share what you learned with Control Engineering at controleng.com/contribute.

Mark T. Hoske, CFE Media, Control Engineering content manager

More advice for manufacturers and photos: http://www.controleng.com/single-article/plant-tour-gaining-efficiencies-in-mechanical-drives/4d52744bd4.html

ONLINE extras

Video: Integrated system benefits, screwdriver leads to design changes

http://controleng.com/videos 

Video plant tour: The heart of a wind turbine

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=11823 

Video: How variable frequency drives are more efficient than dampers

http://www.controleng.com/media-library/videos/single-article/video-yaskawa-talks-variable-frequency-drives/85ead3a648.html 

Teens who don’t see an interest in manufacturing could benefit from a factory tour

http://www.controleng.com/channels/sustainable-engineering/sustainable-engineering-news/single-article/study-teens-don-t-see-a-future-in-manufacturing/8af66986d3.html 

Leader Under 40 winner got interested in manufacturing with a cool plant tour

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=59713

Motor manufacturer tour: Employees help in effort to get lean

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=2065 

Tour: Guess the company...scroll down for photos, answers

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=7499 

Flowmeter Manufacturing, Testing

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=4131 

Grow with automation:  Visit, read, see, learn, and apply

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=18316 

Rebirth and expansion after plant fire

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=609

Tour: Don’t lose your head over safety

http://www.controleng.com/index.php?id=483&cHash=081010&tx_ttnews[tt_news]=4064 

Will it run in the dark?

www.controleng.com/index.php



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
High-performance buildings; Building envelope and integration; Electrical, HVAC system integration; Smoke control systems; Using BAS for M&V
Pressure piping systems: Designing with ASME; Lab ventilation; Lighting controls; Reduce energy use with VFDs
Smoke control: Designing for proper ventilation; Smart Grid Standard 201P; Commissioning HVAC systems; Boilers and boiler systems
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Consulting-Specifying Engineer case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
Integrating BAS, electrical systems; Electrical system flexibility; Hospital electrical distribution; Electrical system grounding
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.