Explosion proof LED drop light

The EHL-LED-7W-GCR100 explosion proof LED drop light is approved for Class 1 Division 1 and 2 locations, and runs cool to the touch.

09/08/2016


The EHL-LED-7W-GCR100 explosion proof LED drop light is approved for Class 1 Division 1 and 2 locations, and runs cool to the touch. Courtesy: Larson ElectronicsLarson Electronics' the EHL-LED-7W-GCR100 explosion proof LED drop light is approved for Class 1 Division 1 and 2 locations, and runs cool to the touch. This handheld LED drop light features aluminum and steel construction, a molded rubber bumper guard, a 10 W LED bulb, and a general use cord reel equipped with 100 ft of cord. The LED bulb produces 1050 lumens and has a 50,000-hour life rating. The rugged lamp housing features a tough aluminum lamp cage and an integral aluminum hook. White illumination provides detail rendering, contrasting, and color reproducing qualities which are suited for close work and detail oriented tasks.

Larson Electronics

www.larsonelectronics.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me