EPA allows facilities more time for boiler tune-ups

The U.S. Environmental Protection Agency issued a no action assurance (NAA) letter to facilities that haven't upgraded source boilers at their facilities yet. The NAA will remain in effect until Oct. 1, 2012, or the effective date of a final rule.

03/26/2012


Revel Entertainment Casino & Hotel Resort, Atlantic City, N.J. Courtesy: ArupOn March 13, 2012, the U.S. Environmental Protection Agency issued a “No Action Assurance (NAA) Letter” to area source facilities required to conduct a boiler tune-up by March 21, 2012, under the Area Source Rule. This means that the EPA will exercise its discretion not to pursue enforcement action against sources that fail to complete the boiler tune-up by the compliance date. The NAA remains in effect for area source boilers until Oct. 1, 2012, or until the effective date of a final rule, whichever comes first.

According to the EPA, many facilities with older affected boilers notified the EPA that it was not possible to meet several tune-up requirements by the March 21, 2012, deadline. The tune-up requires operators to conduct stack testing to measure carbon monoxide and oxygen, and many operators said they would have to undergo alterations such as the installation of a sampling port or platform to conduct this type of test. In addition, the tune-up also requires that combustion be optimized consistent with manufacturer specifications, and many older boilers must be repaired in order to meet such specifications. Area source facilities subject to the tune-up requirement include: existing coal units with heat input capacity of less than 10 million BTU per hour and existing biomass or oil units. 

If a facility emits 10 or more tons per year of any single air toxic or 25 tons or more per year of any combination of air toxins, it is considered a major source facility subject to Boiler MACT requirements. 



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me