Emissions disclosure as a business virtue

Some companies are taking the plunge and submitting reports on how much carbon they emit.

12/29/2009


 

Cupping their hands near holes drilled for cable routing, workers at the Boeing Company's four-acre data processing site near Seattle noticed this year that air used to keep the computers cool was seeping through floor openings.

Mindful of the company's drive to slash electricity consumption by 25%, they tucked insulation into holes there and at five similar sites. The resulting savings are projected at $55,000, or some 685,000 kWh of electricity a year.

Yet Boeing's goal is not just to save money. The hope is to keep pace with other companies that have joined in a vast global experiment in tracking the carbon dioxide emissions generated by industry.

Boeing and other enterprises are voluntarily doing what some might fiercely resist being forced to do: submitting detailed reports on how much they emit, largely through fossil fuel consumption, to a central clearinghouse.

The information flows to the Carbon Disclosure Project , a small nonprofit organization based in London that sifts through the numbers and generates snapshots by industry sectors in different nations.

Read the full story.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me