Electricity from industrial waste

Industrial waste heat is being recycled into electricity at Southern Methodist University.

06/04/2008


ElectraTherm

One of the first commercial waste heat generators, designed by ElectraTherm , has been installed at Southern Methodist University in Dallas. According to the company, the generator%%MDASSML%%dubbed Green Machine%%MDASSML%%can produce up to 50 kW of electrical energy, recycled from industrial waste heat. The machine should be able to produce cheap electricity for the university in three to four years.

These units are designed to be scalable and can be safely scaled to produce up to 500 kW of energy. The particular machine installed at Southern Methodist University has exceeded expectations in testing and pushed past its 50 kW rating.

The machine uses the concept of an organic Rankine cycle . A liquid, typically water is heated up by natural heat sources and the resulting vapor is pressurized and used to spin the turbine of an electric generator. The escaping low-pressure vapor is condensed and the process is repeated.

Southern Methodist University is offering tours of its installation to interested companies and energy providers during the Geothermal Energy Utilization Conference , which takes place June 17-18. Tours can be scheduled through Gulf Coast Green Energy by e-mailing Loy Sneary .

A discussion on the history and vision of the ElectraTherm Green Machine featuring CEO Richard Langson is available as a podcast .





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me