Electrical risks at Iraq bases underreported

Deaths and injuries from fires and shocks at U.S. military bases is widespread and dangerous. According to internal Army documents, shoddy electrical work by private contractors is worse than what is publicly said by the Pentagon.

07/18/2008


Shoddy electrical work by private contractors on U.S. military bases in Iraq is widespread and dangerous, the New York Times said , causing more deaths and injuries from fires and shocks than the Pentagon has acknowledged, according to internal Army documents.

 

 

 

Between August 200606, the records note, while another was injured while jumping from a burning guard tower in May 2007.

And while the Pentagon previously reported that 13 Americans have been electrocuted in Iraq, many more have been injured, some seriously, by shocks, according to the documents. A log compiled earlier this year at one building complex in Baghdad disclosed that soldiers complained of receiving electrical shocks in their living quarters on an almost daily basis.

Electrical problems were the most urgent noncombat safety hazard for soldiers in Iraq, according to an Army survey issued in February 2007. It noted “a safety threat theaterwide created by the poor-quality electrical fixtures procured and installed, sometimes incorrectly, thus resulting in a significant number of fires.”

The Army report said KBR, the Houston-based company that is responsible for providing basic services for American troops in Iraq, including housing, did its own study and found a “systemic problem” with electrical work.

But the Pentagon did little to address the issue until a Green Beret, Staff Sgt. Ryan D. Maseth, was electrocuted in January while showering. His death, caused by poor electrical grounding , drew the attention of lawmakers and Pentagon leaders after his family pushed for answers. Congress and the Pentagon’s inspector general have begun investigations, and this month senior Army officials ordered electrical inspections of all buildings in Iraq maintained by KBR.

The internal documents, including dozens of memos, e-mail messages and reports from the Army, the Defense Contract Management Agency and other agencies, show that electrical problems were widely recognized as a major safety threat among Pentagon contracting experts. It is impossible to determine the exact number of the resulting deaths and injuries because no single document tallies them up. (The records were compiled for Congressional and Pentagon investigators and obtained independently by The Times.)







Is your building project the best? Prove it! Enter CSE's ARC Awards!





No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
40 Under 40; Performance-based design; Clean agent fire suppression; NFPA 92; Future of commissioning; Successful project management principles
BIM coordination; MEP projects; NFPA 13; Data center Q&A; Networked lighting controls; 2017 Product of the Year finalists
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me