Electric tankless units

The Tronic 3000 and 5000 electric tankless units from Bosch eliminate the need for costly piping and gas line installation and have efficiencies of 99% and 97%, respectively.

08/17/2012


The Tronic 3000 and 5000 electric tankless units from Bosch eliminate the need for costly piping and gas line installation and have efficiencies of 99 and 97%, respectively. Courtesy: BoschThe Tronic 3000 and 5000 electric tankless series from Bosch, with 99% and 97% efficiencies, respectively, offer a variety of installation options and configurations, and performance inside some of the smallest footprint requirements in the industry. The Tronic series eliminates the need for costly piping and gas line installation, freeing valuable square footage. Unlike traditional tank units, Tronic products are tankless. The lack of stored hot water inside the unit eliminates standby heat losses, minimizes mineral and sediment buildup, and significantly increases efficiency. These point-of-use products also eliminate wait time for hot water as well as piping heat losses. Offered in five compact models (12, 9.5, 7.2, 6, and 3.4 kW), the Tronic 3000 series is an under-sink design offering 99% efficiency.

The Bosch Group

www.boschusa.com



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
40 Under 40; Stand-alone medical buildings; NFPA 92; Specialty fire suppression; Applying 90.1 in lighting design
2016 Product of the Year Finalists: Vote now; Data center Q&A; LED codes; Smart buildings
Fire pump power system design: How to design safe, reliable fire pump power service; Water management in commercial buildings; Emergency egress, illumination
Designing generator systems; Using online commissioning tools; Selective coordination best practices
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
click me