Educational experience: Designing electrical/power systems in K-12 schools

Engineering work on K-12 schools is complex—and not just because of dwindling school budgets. The facilities must meet a broad range of exacting standards coming from officials and state regulatory bodies, in addition to meeting energy efficiency standards.

03/27/2013


Robert J. Linder, PE, LEED AP, Senior Project Manager, Karges-Faulconbridge Inc., St. Paul, Minn.Robert N. Roop, CPD, LEED AP, Principal, Peter Basso Associates, Inc., Troy, Mich.Abbas Shirian, PE, CGD, LEED AP, Principal-in-Charge, Lead Mechanical Engineer, Bridgers & Paxton Consulting Engineers, Albuquerque, N.M.

Participants


CSE: Describe some recent electrical/power system challenges you encountered when designing a new building or retro-commissioning an existing building.

Shirian: With either new building or renovation, dealing with the local utility companies to get information that is critical to the design team is a challenge. For example, for new construction we need to fill out service applications and provide information that is usually not known until design development or later submittals. For renovation projects, challenges include lack of budget to deal with existing upgrades for electrical distribution equipment and understanding of how the latest codes affect and require upgrades to the electrical distribution equipment.

CSE: How do you balance the need for reliable power with the desire for efficiency and sustainability?

Shirian: We specify the most energy-efficient lamp and ballast combination to reduce energy use. More LED products, with the cost coming down, are being used to further reduce energy use. We also specify lighting control that also lends to the reduction of power use: occupancy sensors and multi-level manual switching. Reducing the lighting load will help to reduce the mechanical loads. General power load category has risen in recent years with a greater requirement for technology and computers. Using devices like surge protection and electrical equipment, like “K” rated transformers, helps to clean the power, and the proper sizing of electrical equipment helps to provide reliable power within the facility.

CSE: What types of renewable energy systems have you recently specified in a K-12 school?

Shirian: We have designed numerous ground-coupled heat pump systems for K-12 schools, and they have been well-received by our clients. Most schools request some sort of renewable energy on-site, and we have specified photovoltaics (PV) for some site lighting on a few schools. Normal facility power also is required for these lights during overcast periods.



Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
2017 MEP Giants; Mergers and acquisitions report; ASHRAE 62.1; LEED v4 updates and tips; Understanding overcurrent protection
Integrating electrical and HVAC for energy efficiency; Mixed-use buildings; ASHRAE 90.4; Wireless fire alarms assessment and challenges
Integrated building networks, NFPA 99, recover waste heat, chilled water systems, Internet of Things, BAS controls
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Commissioning electrical systems; Designing emergency and standby generator systems; VFDs in high-performance buildings
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.
Automation Engineer; Wood Group
System Integrator; Cross Integrated Systems Group
Fire & Life Safety Engineer; Technip USA Inc.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me