EC: Fluke 709H Precision Current Loop Calibrator with HART Communications

Hardware - Handheld test, measurement, calibration: The Fluke 709H is a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. This is a Control Engineering 2014 Engineers’ Choice finalist.

10/17/2013


Hardware - Handheld test, measurement, calibration: The Fluke 709H is a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. This is a Control Engineering 2014 Engineers’ Choice finalist.The Fluke 709H Precision Current Loop Calibrator with HART Communications is an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool.

The 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications.

The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in "two places at once."

The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.

www.fluke.com

www.fluke.com/fluke/usen/process-calibration-tools/loop-calibrators/Fluke-709H-Precision-Loop-Calibrator-with-HART.htm?PID=75865 Fluke Corp.



No comments
Consulting-Specifying Engineer's Product of the Year (POY) contest is the premier award for new products in the HVAC, fire, electrical, and...
Consulting-Specifying Engineer magazine is dedicated to encouraging and recognizing the most talented young individuals...
The MEP Giants program lists the top mechanical, electrical, plumbing, and fire protection engineering firms in the United States.
Water use efficiency: Diminishing water quality, escalating costs; Lowering building energy use; Power for fire pumps
Building envelope and integration; Manufacturing industrial Q&A; NFPA 99; Testing fire systems
Labs and research facilities: Q&A with the experts; Water heating systems; Smart building integration; 40 Under 40 winners
Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Protecting standby generators for mission critical facilities; Selecting energy-efficient transformers; Integrating power monitoring systems; Mitigating harmonics in electrical systems
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software
As brand protection manager for Eaton’s Electrical Sector, Tom Grace oversees counterfeit awareness...
Amara Rozgus is chief editor and content manager of Consulting-Specifier Engineer magazine.
IEEE power industry experts bring their combined experience in the electrical power industry...
Michael Heinsdorf, P.E., LEED AP, CDT is an Engineering Specification Writer at ARCOM MasterSpec.